create new looks! Distressed, reverse appliqué, and more...
click to enlarge
Do multiple layers. The E-Laser can cut multiple layers at one time or kiss cut only the top layer of fabric. You control the depth of each cut.
click to enlarge
No Modifications Made to Embroidery Machine!
The E-Laser is an onboard LASER cutter that mounts directly to your single head embroidery machine. Producing appliqué with
a LASER cutter is more than twice as fast as traditional methods.
••• there is no time spent cutting out designs ••• it eliminates the need to position the appliqué in the hoop ••• no spray adhesive to keep the appliqué from moving
This affordable laser cutter works with any make or model of embroidery machine. The laser is attached to the first needle and uses the embroidery frame movement to guide the laser.
New Looks! Greater Profits!
E-Laser allows any embroiderer to offer the latest looks in appliqué such as distressed and reverse. This is the same type of appliqué work you see in major retail brands such as Hollister, Urban Outfitters, and Abercrombie & Fitch.
You can now use a much wider range of fabrics than possible with traditional appliqué. You are not limited to polyester twill. T-shirt material, fleece, polyester fleece, felt, and even patterned cotton fabrics can be used to add excitement, texture, and dimension to appliqué.
Easily adjust the power to match a wide range of fabric types and thickness.
Achieve Great Accuracy and Detail
With a laser cutter, the laser head is mounted 1 1/2 inches above the fabric and cutting is accurate to within 1/100th of an inch. You can do much finer detail and more sophisticated designs.
Fully automated The entire laser-cutting process requires minimal operator intervention, which cuts down on labor and chance of operator error. Once a design is set up, the operator simply loads, presses the start button, weeds, and unloads. It's that fast and simple.
Powered by state-of-the-art laser-cutting software The E-Laser is guided FocusCut III software designed by Proel.
The laser cuts only within the sewing area of an embroidery hoop. FocusCut III converts any embroidery digitized
data into laser-ready format. You also can manage all your digitizing and laser files at the same time, a task no
other program can do.
Expandable! It's easy to expand your singlehead E-laser to a two head or a four-head embroidery machine.
Small Footprint The footprint of the single head E-Laser is only 12 inches by 15 inches so it does not take up a lot of space.
Power Options Depending on your requirements, the E-Laser comes equipped with a 25-watt or 50-watt CO 2 laser. A smoke suction vacuum quickly removes fumes
How It Works With the E-Laser, a square of appliqué fabric is simply laid over the hooped garment. The embroidery machine sews the outline or design.
Then the laser cuts out the design, it is weeded, and it's done. Edges can be then sewn with a satin stitch as a border or it can be left raw
for the popular distressed look.
For more information or to speak to a sales representative, please call 866-248-6872
BITO customer earns
cover of Stitches Magazine
with impressive design
using a Proel LaserBridge more...
